How Do You Update a Bathroom With Vanity Units?

How Do You Update a Bathroom With Vanity Units?

Last Updated: November 19, 2026

Quick Summary

To update a bathroom with vanity units, measure the wall width, door swing, and basin height first, then choose a wall-hung or floor-standing unit that suits the space. Check the water and waste positions against the unit before you order, and budget for fixings, sealant and any fitting work.

  • Measure the wall width at the top, middle and bottom
  • Mark the water and waste connection positions before ordering
  • Wall-hung units leave the floor visible and suit small rooms
  • Check that the wall can take the load before choosing wall-hung
  • Hire a professional for plumbing, gas or electrical work
Ready to upgrade your bathroom?Wetwall Wonders supplies vanity furniture packs and bathroom essentials for homeowners and fitters.
Browse Vanity Units

Table of Contents

Updating a bathroom with a new vanity unit is one of the quickest ways to change the look of the room. Wetwall Wonders sells wall-hung and floor-standing furniture packs. A good-looking unit can still fail if it does not fit the space, so measuring first makes the rest of the project far easier. Measure first, and the rest of the project becomes far easier.

Vanity units come in a range of widths, depths and heights, so the room itself sets the limit. Take the width of the wall where the unit will sit, the distance from the wall to the door swing, and the height from the floor to the point where the basin will rest. Note where the waste pipe and water supply come out of the wall, because these often decide the final position.

Keep a few clearances in mind. Leave enough room to open the drawer fully and to stand comfortably at the basin. Check the height of the basin against the people who will use it most, since a unit that feels right for one person can feel awkward for another.

  • Measure the wall width at the top, middle and bottom
  • Mark the position of the water and waste connections
  • Note the distance from the wall to the door swing
  • Record the height from the floor to the basin rim

A quick sketch with measurements saves wasted trips to the shop and returned parcels later.

Choosing a Bathroom Vanity Unit: Style, Mounting and Storage

Once you know the space, the next decision is style and fixing. A vanity unit sits within a wider bathroom layout, so it should suit the room as much as your taste. Modern, contemporary and traditional designs all work well, but the finish you pick affects how the room feels day to day.

Wall-hung versus floor-standing units

Wall-hung units are fixed to the wall and leave the floor visible underneath. This makes a small room look larger and makes cleaning easier. Floor-standing units sit on the floor and offer a firmer base, which many people prefer for heavier basins. Check that the wall can take the load before you choose a wall-hung option.

Drawer configurations and storage capacity

Units vary from single-drawer designs to double-drawer options. A single drawer suits a compact bathroom, while more drawers give you space for toiletries, towels and cleaning products. Think about how much you need to store, then choose the layout that fits.

Small Bathroom Vanity Units and Tight Layouts

Small bathrooms need careful planning. A narrow room can still take a compact unit, but you must leave enough space to move around. Our guide to what size basin unit fits a small bathroom helps you choose the right width for a compact space. The Cosmos 500mm Basin Unit & Rimless Close Coupled WC Pack in Matt White combines a 500mm wall-hung 1-drawer basin unit with a close coupled toilet in one matching set. You can see the options in the Cosmos range, available in Matt Black, Matt Latte and Matt White.

Cosmos 500mm Basin Unit & Rimless Close Coupled WC Pack - Matt White
Cosmos 500mm Basin Unit & Rimless Close Coupled WC Pack - Matt White

In a small room, a wall-hung unit helps keep the floor clear. Keep the door swing and the toilet position in mind when you set the unit's place on the wall.

Compatibility Checks and Realistic Budgets Before You Order

Before you order, check that the unit, basin, taps and waste all fit together. Confirm the position of the water supply and waste on your wall against the unit's specification. A mismatch here often means extra parts or a rethink.

Budget more than the unit price alone. The Cosmos pack is priced at £350.00, while the Volta 510mm F/S Furniture Pack in Anthracite Gloss with Black Finishes is £695.00 and includes a basin mixer, matt black D-shape handle, overflow ring and a free 500x700mm LED mirror. Add the cost of any extra fixings, sealant and tools you do not already own, and leave a small margin for surprises behind the wall.

How to Install a Vanity Unit, Step by Step

Fitting a unit is a practical job, and the steps below cover the usual sequence. Work slowly and check each stage before moving on.

Removing the old unit and checking the water and drain connections

Turn off the water supply first. Disconnect the taps and waste, then remove the old unit carefully. Look for damaged walls or old fixings, and check the water and drain connections are sound before fitting anything new.

  • Isolate the water supply
  • Disconnect the taps and waste
  • Remove the old unit and fixings
  • Check pipes and connections for leaks or damage

For a wall covering that gets in the way, a guide on how to remove old wetwall panels safely can help you prepare the wall before fitting.

When to DIY and when to hire a professional fitter

Many homeowners can fit a wall-hung unit with basic tools and patience. Plumbing changes, moving pipework or working with a damaged wall are better left to a qualified fitter. If the job involves gas or electrical work near the unit, hire a professional without hesitation.

Finishing Touches: Mirrors, Lighting and Taps

Once the unit is fixed, the finishing details complete the look. A mirror above the basin adds light and depth, and Good lighting around the mirror makes morning routines easier. You can also browse a Bluetooth mirror in a matching size for the wall above your new unit. Choose taps that match the finish of your unit, so the room feels cohesive.

Leven 600 x 600 bluetooth mirror
Leven 600 x 600 bluetooth mirror

Booking Your Vanity Unit Upgrade This Month

A new vanity unit changes a bathroom quickly, but only if the measurements, fit and budget all line up. Start with the room, check the connections, then choose the style and storage that suit daily life. Explore the Cosmos and Volta packs to see what would fit your space.


Frequently Asked Questions

How do I choose the right vanity unit for my bathroom?

Start by measuring the wall space, the distance from the soil pipe to the wall and the available floor area. A 500mm unit suits many compact ensuites, while a 510mm floor-standing furniture pack, such as the Volta at £695.00, is an option for larger rooms. Check the style, drawer configuration and whether you prefer wall-hung or floor-standing mounting before you order, so the unit fits your existing plumbing and gives you the storage you need.

Homeowner installing a matt black wall-hung vanity unit in a bright bathroom with tools on a dust sheet
Homeowner installing a matt black wall-hung vanity unit in a bright bathroom with tools on a dust sheet

Can I replace a bathroom vanity unit without changing the plumbing?

Often yes, provided the new unit's basin and waste position matches the existing water supply and drain connections. Compare the unit dimensions with your current set-up, paying attention to the basin width and tap holes. If the new unit needs the pipework moved, a qualified plumber should handle that work. The Cosmos 500mm Basin Unit & Rimless Close Coupled WC Pack, priced at £350.00, comes with a single tap hole, which suits most standard basin set-ups.

What size vanity unit is best for a small bathroom?

Compact units of around 500mm wide suit small bathrooms and narrow ensuites, leaving more floor space for the door swing and movement. Measure the clear space before you buy, allowing room for the door to open and for the basin to be used comfortably. Wall-hung designs free up floor area and make small rooms feel less cramped, and the Cosmos 500mm wall-hung one-drawer unit is a practical option for tight layouts.

How can I update an old bathroom vanity unit?

Replacing the unit is the quickest route to a fresh look, but you can also refresh the surrounding details. Update the basin taps, add a new mirror with integrated lighting, and tidy the wall behind the unit with panels that are easy to clean. Matching the new unit's finish to the rest of the room, whether matt white, latte or matt black, helps the upgrade look planned rather than piecemeal.

Leave a comment

  • ITEM BAR TITLE

    Share shipping, delivery, policy information.

  • ITEM BAR TITLE

    Share shipping, delivery, policy information.

  • ITEM BAR TITLE

    Share shipping, delivery, policy information.

  • ITEM BAR TITLE

    Share shipping, delivery, policy information.